| | Home > Shop By Brand > System One Advanced Polishing System > System One X3 Cutting Polish 8 oz
| | System One X3 Cutting Polish 8 oz |  |  One polish compounds, removes swirls, and enhances gloss!
Take your vehicle’s finish from dull and scratched to smooth and glossy with just one polish! System One X3 Cutting Polish performs every step of the polishing process. To change its performance, simply use a different pad. The pad’s cut determines how aggressively or how gently System One X3 Cutting Polish cuts the paint.
The secret to System One X3 Cutting Polish is its uniform, small abrasives. These are not diminishing abrasives. They start small to deliver consistent polishing action to the paint until the imperfections disappears. Because the abrasives are so small, they do not leave the micro-marring associated with heavy compounds.
Since the abrasives in System One X3 Cutting Polish are consistent in size and shape, the pad actually determines the polish’s cut. Use a wool pad for powerful leveling. Use a soft foam pad for final polishing. You’ll be amazed at the versatility of System One X3 Cutting Polish!
System One X3 Cutting Polish can be used for body shop refinishing. Use it after color sanding to restore a perfect shine. It removes up to 2000 grit scratches. The water-based formula is easy to clean up.
For professional detailers, System One X3 Cutting Polish replaces several bottles of polishes and saves time! Instead of buying three different products, you only need System One X3 Cutting Polish. And, because the abrasives are so small, you can restore the paint’s gloss in fewer steps.
For hobbyists, System One X3 Cutting Polish is easy to use and delivers great results. The small abrasives are safer on the edges of panels where paint is thinner. Use it on any type of paint.
System One X3 Cutting Polish is water-based, non-toxic, and has a very low solvent content. There’s no harsh solvent smell and the polish will not separate if left standing for a long period of time. This unique formula does not stick to the paintwork. In fact, the white reside will flake off when dry because it has an anti-static base. Clean-up couldn’t be easier!
System One X3 Cutting Polish has no fillers. You’ll see the real benefits of your work.
System One X3 Cutting Polish is recommended for use with a rotary polisher. Use the System One 8 inch Compounding/ Finishing Pad to simplify your detailing process even more. This single pad has blended wool on one side and soft finishing foam on the other side.
System One X3 Cutting Polish also works with standard foam compounding and polishing pads by the Edge 2000 and Lake Country.
System One X3 Cutting Polish saves time, saves money, and saves space in your garage! One polish is all you need to compound, remove swirls, and restore a showroom shine.
Directions:
p class="MsoNormal">Directions:
- Make sure the
vehicle is clean, dry, and relatively cool to the touch.
- To compound, use a
wool cutting pad on your rotary polisher. To polish, use a foam polishing
pad.
- Apply a quarter-size
amount to the paint. System One X3 is a gel that clings to vertical
surfaces. Use sparingly.
- Set your polisher
maximum speed at 1500 rpm. For wool, maintain a speed
between 1000 and 1200 rpm. With a foam pad, you can work up to 1,500 rpm if needed.
- Work the polish
until the paint appears glossy.
- Buff the paint with
a microfiber towel.
- If you’ve used a
wool pad, you should switch to a foam polishing pad in order to polish the
paint to a deeper gloss. Repeat the same process.
8 oz.
|
|
|
| | System One X3 Cutting Polish 32 oz
| | | | System One X3 Cutting Polish 128 oz
| |
| 
| | Need Assistance?
Call Toll-Free 1-800-215-4460 to speak to a Customer Service Representative or
email us
|
| |
